Lifeboat Foundation

Heliogen announced the roll-out of its robots to install and clean its CSP plants.

Heliogen, a California-based developer of concentrated solar power (CSP) plants, held the first technical demonstration of its ICARUS, or Installation & Cleaning Autonomous Robot & Utility Solution.

ICARUS is a system of autonomous robots designed to clean the heliostats, which are the reflective mirrors of the CSP system. Heliostats reflect sunlight into a collection tower, where the light and heat is converted to electricity and usable thermal energy. Recently, the company partnered with Bloom Energy to produce hydrogen fuel.

Continue reading “Autonomous robot for concentrated solar power installation and maintenance” »

And it would create 4.7 million long-term jobs.

The United States’ energy system that’s running completely on wind, water, and solar, combined with storage, would not only avoid blackouts but also lower energy requirements and consumer costs, a Stanford University study has shown. In addition, this would create millions of jobs, improve health, and free up land for various other purposes.

This is incredibly important because, for some people, a future powered by renewable energy isn’t feasible due to concerns about blackouts driven by inconsistent electricity sources. Take, for example, the grid blackouts caused by extreme weather events in California in August 2020 and Texas in February 2021.

Continue reading “Researchers Show a 100% Renewable US Grid with No Blackouts Is Possible” »

The auto-retracting system can be deployed when solar energy is needed.

California-based energy firm Xponent Power developed an auto-retracting Xpanse Solar Awning that can be deployed if and when solar energy is needed, a report from New Atlas reveals.

Continue reading “A ‘World First’ Solar RV Awning Enables More Affordable Off-Grid Living” »

Tens of thousands of years ago, on the territory of the uninhabited Sahara Desert, gardens flourished, rivers flowed, ancient people cultivated fertile lands. However, we know how it all ended — today in this place is a desert scorched by the blazing sun with an area 38 times the size of Great Britain. However, humanity has a chance to return life to these lands again, and as a bonus to receive free electricity for all inhabitants of the planet.
The installation of wind and solar farms could radically change the climate in this region: more rainfall, which will lead to a revival of vegetation and a drop in temperature. At least that’s what Yang Li, the study’s author and senior researcher at the University of Illinois, says. No mystery! Wind turbines facilitate the diffusion of hot and cool air. This, in turn, will raise the average rainfall by 50%, and solar panels absorb most of the solar energy, preventing it from overheating the earth.
All this will be effective only with the global development of a lifeless desert. The process has already begun. But they tried repeatedly to tame the cruel and hot sun of the Sahara.

#inventions #technology #solar.

Continue reading “Giant solar power plants of the Sahara” »

Israeli drone manufacturer Airobotics has collaborated with Israeli solar farm services company Solar Drone to develop and supply to Solar Drone a unique solar panel cleaning drone system. The fully automated system will include a drone docking station for automatic battery replacement and cleaning fluid replenishment, enabling the system to operate continuously.

While solar power and solar panels are essentially maintenance-free systems, but solar panels do require cleaning from time to time to enable proper function. Dirt, dust, mud, and bird dropping greatly reduce solar panel efficiency, impacting power output. Frequent cleaning is expensive and time-consuming, especially when panels are remote, difficult to access, or difficult to clean.

Continue reading “Airobotics, Solar Drone to develop new drone for solar panels cleaning” »

An energy-storage solution that flows like soft-serve ice cream.

Graphene consists of a planar structure, with carbon atoms connected in a hexagonal shape that resembles a beehive. When graphene is reduced to several nanometers (nm) in size, it becomes a graphene quantum dot that exhibits fluorescent and semiconductor properties. Graphene quantum dots can be used in various applications as a novel material, including display screens, solar cells, secondary batteries, bioimaging, lighting, photocatalysis, and sensors. Interest in graphene quantum dots is growing, because recent research has demonstrated that controlling the proportion of heteroatoms (such as nitrogen, sulfur, and phosphorous) within the carbon structures of certain materials enhances their optical, electrical, and catalytic properties.

Graphene consists of a planar structure, with carbon atoms connected in a hexagonal shape that resembles a beehive. When graphene is reduced to several nanometers (nm) in size, it becomes a graphene quantum dot that exhibits fluorescent and semiconductor properties. Graphene quantum dots can be used in various applications as a novel material, including display screens, solar cells, secondary batteries, bioimaging, lighting, photocatalysis, and sensors. Interest in graphene quantum dots is growing, because recent research has demonstrated that controlling the proportion of heteroatoms (such as nitrogen, sulfur, and phosphorous) within the carbon structures of certain materials enhances their optical, electrical, and catalytic properties.

The Korea Institute of Science and Technology (KIST, President Seok-Jin Yoon) reported that the research team led by Dr. Byung-Joon Moon and Dr. Sukang Bae of the Functional Composite Materials Research Center have developed a technique to precisely control the bonding structure of single heteroatoms in the graphene quantum dot, which is a zero-dimensional carbon nanomaterial, through simple chemical reaction control; and that they identified the relevant reaction mechanisms.

With the aim of controlling heteroatom incorporation within the graphene quantum dot, researchers have previously investigated using additives that introduce the heteroatom into the dot after the dot itself has already been synthesized. The dot then had to be purified further, so this method added several steps to the overall fabrication process. Another method that was studied involved the simultaneous use of multiple organic precursors (which are the main ingredients for dot synthesis), along with the additives that contain the heteroatom. However, these methods had significant disadvantages, including reduced crystallinity in the final product and lower overall reaction yield, since several additional purification steps had to be implemented. Furthermore, in order to obtain quantum dots with the chemical compositions desired by manufacturers, various reaction conditions, such as the proportion of additives, would have to be optimized.