Lifeboat Foundation

Researchers from the Dutch Delft University of Technology and NASA/ESA recommend that we build a Mars base with the use of bacteria. In short, the idea is to send a spacecraft containing bacteria to Mars several years ahead of sending human settlers. Those bacteria can then start mining for iron that will later be used by human pioneers when building settlements.

Benjamin Lehner, a Ph.D. student from the Delft University of Technology, mapped out a complete plan to adequately prepare for human settlers. He proposes to send an initial capsule containing a bioreactor, an uncomplicated rover that is capable of digging, and a 3D printer. The reactor will be filled with a type of bacteria called ‘Shewanella oneidensis’ that can convert the non-usable naturally occurring iron in the Martian soil to usable magnetite that is easy to extract. This magnetite can then be converted to components like iron plates with the 3D printer.

Any comments?

Ultraprecise 3D printing technology is a key enabler for manufacturing precision biomedical and photonic devices. However, the existing printing technology is limited by its low efficiency and high cost. Professor Shih-Chi Chen and his team from the Department of Mechanical and Automation Engineering, The Chinese University of Hong Kong (CUHK), collaborated with the Lawrence Livermore National Laboratory to develop the Femtosecond Projection Two-photon Lithography (FP-TPL) printing technology.

By controlling the laser spectrum via temporal focusing, the laser 3D printing process is performed in a parallel layer-by-layer fashion instead of point-by-point writing. This new technique substantially increases the printing speed by 1,000—10,000 times, and reduces the cost by 98 percent. The achievement has recently been published in Science, affirming its technological breakthrough that leads nanoscale 3D printing into a new era.

Continue reading “New technique increases 3D printing speed by 1,000 to 10,000 times” »

NASA has tentative plans for a manned mission to Mars sometime in the 2030s. Between now and then, there’s still much that needs to be sorted. To start, massive dust storms, high levels of radiation, low temperatures and a lack of water make the Martian surface an unfriendly place for long-term visits. Taming it for human life will likely prove one of the most demanding and complex engineering puzzles in human history. With those extraordinary obstacles in mind, in 2015 NASA announced the 3D-Printed Habitat Challenge: an open call asking designers and architects outside the traditional aerospace industry to create plans for Martian living centred around 3D printing. One of 10 finalists announced in 2019, this plan from the design practices HASSELL and Eckersley O’Callaghan envisions teams of 3D-printing robots building a protective shield on the Martian surface several months in advance of a human landing. Upon arrival, astronauts would then work alongside the autonomous robots to piece together an inflatable, modular habitat.

Video by LightField London.

I am in shock… Google suddenly as yahoo are allowing conjecture and mendacity be seen as public or scientific opinion. Here is another confused mind who towards the end of her rant quotes Christian scripture as basis to stop Life extension-Transhumanism???

When I say to these minds Behold the leader of Christianity stood for Life abundant-Super Longevity and I can prove such. No matter what lost evangelist or preacher tells you Jesus was a medical researcher of extraordinary magnitude…

NOW BEHOLD THE LOST in this article… https://www.rodofironministries.com/…/transhumanism-and-imm… Respect r.p.berry & AEWR wherein aging now ends we have found the many causes of aging and we have located an expensive cure. We search for partners-investors to now join us in agings end… gerevivify.blogspot.com/

Continue reading “Transhumanism and Immortality” »

Read more

3D printing technology is changing and will change pretty much everything. Besides printing the intermittent novelty project at home with a desktop printer, additive manufacturing or 3D printing technology is being used in a large group of businesses changing the manner in which we design, build, create, and even eat.

NASA is planning to use 3D printing technology to construct housing on Mars for future colonies while organizations like byFlow are using the emerging technology to create food and intricate edible tableware. The uses and applications appear to be both limitless and exciting, yet this is only the beginning. Things being what they are, what sort of changes can we expect to see in the medical industry?

Millions of people need new corneas. In a major breakthrough, researchers can now 3D print them.

In the future, you could 3D print organ replacements and biological tissues anywhere you want!

The Michelin Vision tire concept does not need to be inflated, is specifically manufactured through 3D printing, and is biodegradable.